This is a copper drawer or cupboard handle that measures 4 1/4" inside, with a height of 7/8". Threaded ends are determined by the depth of your drawer or cupboard. I have threaded these 1" for my cupboard, and ended them with the corresponding nut with the same thread pattern, which is fine, with an 8-32 die. I have used 4 gauge copper wire for the initial frame, and then twisted another 4 gauge wire across the top and hammered the ends...

This 38" six strand necklace is divided into three long strands on either side of a hand made fine silver clasp, with handmade bead caps. Clear crystal seed beads are separated with Aurora Borealis 8mm Swarovski crystals, and each single strand is separated at the bottom into two single strands with smaller silver lined seed beads ending in an 8mm and a 5mm Swarovski crystal. This necklace can be worn a variety of ways...

This stunning necklace features an impressive carnelian pendant that measures 1 7/8" x 1 3/8" x 3/8" thick with a sterling bail. The 1 1/4" round domed banded agate beads are double drilled and Victorian. Smaller 8mm and 12mm banded agate beads with hand cut black faceted beads are shown on double strands, making this a wonderful design and look. The Sterling silver clasp is hand formed. The necklace measures 21" long with a 2 1/4" drop...

This is a heavy cuff, made from twisted 6 gauge copper wire, with Sterling Silver embellishments on both ends. I have finished this to show the deep colorations that the torch makes on copper, without the pickling. After I marked the cuff with 43*** and handmade and Sterling, I filed and sanded and then buffed with two compounds to bring out the shine on the rounded tops of the heavy wire...

This is a heavy cuff, made from twisted 6 gauge copper wire, with Sterling Silver embellishments on both ends. I have finished this to show the deep colorations that the torch makes on copper, without the pickling. After I marked the cuff with 43*** and handmade and Sterling, I filed and sanded and then buffed with two compounds to bring out the shine on the rounded tops of the heavy wire...

This is a heavy cuff, made from twisted 6 gauge copper wire, with Sterling Silver embellishments on both ends. I have finished this to show the deep colorations that the torch makes on copper, without the pickling. After I marked the cuff with 43*** and handmade and Sterling, I filed and sanded and then buffed with two compounds to bring out the shine on the rounded tops of the heavy wire...

This is a heavy cuff, made from twisted 6 gauge copper wire, with Sterling Silver on one end. I have finished this to show the deep colorations that the torch makes on copper, without the pickling. I soldered the ends and on one side soldered some Sterling Silver. After I marked the cuff with 43*** and handmade and Sterling, I filed and sanded and then buffed with two compounds to bring out the shine on the rounded tops of the heavy wire...

If you are looking for a great brass cuff that makes you feel like Wonder Woman, you have found it here! This 4" long cuff, will fit a medium arm, from the wrist which has a measurement of 6 1/2" and an opening of 1". The larger end is 8" with a 1 1/2" opening. The brass has been hammered and textured, with a folded seam down the middle and two diagonal seams at the top for fit. I have filed, sanded and buffed the cuff to a high sheen.

This interesting necklace shows a great mix of lime green Howlite beads, large Amethysts and Labradorite, Peridot and Garnets with four 9mm platinum grey freshwater Pearls. It reminds me of Lime Fizz and grapes, a perfect summertime look! Showcasing a fiery Labradorite and two Amethysts, are 3 Fine Silver picture frames. The frames measure 1 3/8" x 1 1/4", and the Sterling Silver handmade clasp features a round off center circle, with an arrow shape...

These stunning Sterling Silver Mobile Earrings with triangles is more architectural in design. These were fun to put together, just to have them a bit more classic in look...

These sterling earrings were so much fun to make. Making earrings that hang correctly from the ear, required a test pair just to make sure they balanced correctly. From my hand made ear wires to the finish on each and every surface, these were filed, and sanded down to 1500 grit smoothness. They are light and flirty, and sound amazing, with their soft tinkle...

This ring was just made for a pinky finger! Just big and interesting enough to draw attention. It is made from 1/4" wide Fine Silver in 20 gauge. The band has been scribed on the edges, hammered and stamped, then formed to create two of the prong tabs, covering the 3/4" by 1/2" pink and brown geode. Another band is double riveted creating the remaining prong tabs. I have stamped 43***, handmade, and .999 on the inside of the band.